DIN+ WOOD PELLETS

  DIN+ WOOD PELLETS Pellets are categorized by their heating value, moisture and ash content, and dimensions. They can be used as fuels for power generation, commercial or residential heating and cooking. Pellets are extremely dense and can be produced with a low moisture content (below 10%), which allows them to be burned with a very high combustion efficiency.

All European heating equipment is supplied with data sheets indicating biofuel parameters to achieve the highest possible efficiency and efficient operation. There are often cases where the cause of the failure of the pellet boilers was the supplier of poor quality pellet fuel. That’s why consumers pay close attention to the quality of wood pellets.

The company applies ecological raw materials for the production of pellets, supplied under contracts with the state forestry of Ukraine. This gives us the opportunity not only to guarantee the stability of the quality indicators, but also to guarantee the stability of the volumes of products delivered. This type of cooperation predetermines the unconditional fulfillment of our obligations to counterparties.

Each released batch of our wood pellets corresponds to specially developed and approved technical conditions that make our pellets competitive in the domestic and foreign markets. The ash content of our pellets is within 1%, which allows us to use them for heating private homes. DIN+ WOOD PELLETS

Diameter 6 mm;
Ash content up to 1%;
Humidity up to 9%;
Bulk density 630 kg / m3;
Abrasion – up to 3%;
Caloric content: 4600 kcal / kg.

Hardwood against 6mm softwood pellets :
woods such as maple, oak, birch and ash. And we all know to put soft woods like pine, spruce and spruce.

Production techniques:

The raw material enters the crusher, which is reduced to a flour state. The resulting dough is fed into the dryer from it – into a pellet press in which a compressed wood flour pellets. Compression during pressing increases the temperature of the material, the lignin contained in the wood particles softens and sticks in a tight cylinder. To produce a ton of pellets about 2.3-2.6 cubic meters of wood waste are needed, plus 0.6 cubic meters of sawdust is burned per ton of production.

The final pellets are cooled, packed in different packages – from small packages of 15 kg to big-bags (large industrial packages) of 1.1 ton – or delivered to the consumer in bulk.
A pellet stove is a stove that burns compressed wood or biomass pellets to create a heat source for residential and sometimes industrial spaces. By constantly feeding fuel from a storage vessel (hopper) into a burning area, it produces a constant flame that requires little or no physical adjustment. DIN+ WOOD PELLETS

The efficiency of a pellet stove can reach 90% or more. … This is more than a classic wood burning stove, with an efficiency of just 40 to 50% (60 to 80% for newer high efficiency stoves) and much more than a fireplace, with an efficiency of 5 to 15%.

Pellet stoves can only burn wood pellets (as Jodi mentioned) or biofuels like dry corn (depending on the actual model). It would be unwise to try to burn wood or kindling inside a pellet stove, because of how a pellet stove actually works.

Storage :
For best longevity, wood pellets should be stored indoors. Damp locations may require a dehumidifier. When stored properly, pellets can have a shelf life of more than two years, but ideally are used over a period of six months. In Europa Pellets, we can store pellets outside because of our high turnover rate, so no ton of pellets are left outside for more than a month or two.

From heating to horse litter: Pellets A1 uses :
A small and compact product that faces some big challenges, our pellets are a true force of nature. About the height of a bottle stopper, they are an energy-rich, low-ash, low-humidity, clean-burning heating source for wood pellet heaters and boilers in residential, commercial, and large-scale industrial heating applications.

The excellent quality of the pellets is essential to obtain a constant and ideal heating process. As there are different qualities of fuel, it is essential that stove and boiler owners choose the right quality fuel that best suits their facility.